Chrome and Aurora Powder MJ01

Nail Preparation:

Push back cuticles with a cuticle pusher, polish the nail surface if necessary and clean with Bluesky Cleanser Pads

Instructions:

1. Apply a thin layer of Bluesky Base Coat, cure for 30 sec.
2. Apply a thin layer of Gel Polish 80518, cure for 30 sec.
3. Repeat step 2 to achieve sufficient coverage
4. Apply Bluesky Top Coat No Wipe, cure for 30 sec.
5. Apply the Chrome powder with the included applicator
6. Rub onto the nail with the applicator until the desired effect is achieved, do not press too hard or you will wipe off the powder
7. Remove excess powder with a soft brush!
8. Reapply Top Coat No Wipe and seal well over the edge of the nail
9. Cure nail under the lamp

Note: Curing takes place under UV/LED light, curing time depends on the lamp you use.